FLUKE 89 IV REPAIR and FLUKE 89 IV CALIBRATION
 
Custom-Cal has a high success rate in the repair of the FLUKE 89 IV. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 89 IV Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our  used Multimeter DMM page

 
   FLUKE 89 IV (89IV)   Description / Specification:    
FLUKE 89 IV True RMS Handheld Digital Multimeter

The Fluke 89 IV True RMS Multimeter includes a bar graph that provides an analog indication of the measured input. Basic Specifications. DC Voltage: 0 to 1000 V. AC Voltage, true RMS: 15 mV to 1000 V – 100 kHz bandwidth. Basic Accuracy DC voltage: 0.025 %. Basic Accuracy AC voltage: 0.4 %. DC Current: 0 to 10 A (20 A for 30 seconds). AC Current, true RMS: 25 mA to 10 A (20 A for 30 seconds). Resistance: 0 to 30 M-ohm. Conductance: 0 to 50 nS. Capacitance: 0.001 nF to 50 mF. Diode Test: 3.1 V. Temperature: -200 °C to 1350 °C (-328 °F to 2462 °F). Frequency: 0.5 Hz to 1000 kHz. Maximum voltage between any terminal and earth ground: 1000 V ac/dc. Display (LCD) Digital: 50000/5000 counts primary display, 5000 counts secondary display; updates 4/second. Display (LCD) Analog: 51 segments, updates 40/second. LOGGING Intervals: At least 288 intervals may be stored. Up to 700 unstable event values (see AutoHold) are automatically added to LOGGING memory for viewing only through optional PC software.



 

Standard Calibration $70.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 89 IV. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your FLUKE 89 IV REPAIR and/or FLUKE 89 IV True RMS Handheld Digital Multimeter CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: